Review – URTH Square Filter Holder 


Urth (formerly Gobe) released its range of Square ND Filters in 2019. In fact, we tested them while we were in Fiji in February 2020 which was our last time overseas before being imprisoned ‘Down Under’ due to Covid-19. frown

So, we were thrilled when, in July 2021, they finally released their Square Filter Holder along with many new products in July 2021. We were especially interested in testing the 100mm Square Filter Holder to see how well the built-in rubber gasket performed. We have never encountered a holder with a gasket already integrated into it. Other brands usually attach these to the back of the Square ND Filter, and in the past, we’ve had to attach a NiSi Filters gasket to the back of some Gobe/Urth Square ND Filters to avoid light leaks when taking long exposures.

In this review, we’ll also compare it to the NiSi Square Filter Holder, however, please keep in mind that we still have the original V5 NiSi Square Filter Holder.

Urth, as usual, was kind enough to send us the 100mm Square Filter Holder for this review. Although we received the filter free of charge, this post is an unbiased review. Please read our disclaimer at the bottom of this post.


What is a Square Filter Holder?

In a nutshell, a Square Filter Holder is a product that is designed to be attached to the front of a lens by way of an adapter ring to mount a Square Filter (although technically speaking the only real square filter is the ND Filters). Generally speaking,  Filter Holders can usually hold up to three square filters and a C-PL filter at the same time. Due to their design, they rarely cause vignetting in an image even when three filters are combined. A standard 100mm Square Filter Holder that holds 100x100mm and 100x150mm filters will be suitable for most lenses, however, some extreme ultra-wide-angle lenses will require a customised Square Filter Holder to accommodate the extreme angle of view and will require larger filters. Most Square Filter Holders will also allow you to insert a C-PL (Circular Polarizer) Filter and rotate independently from the Square Filters. For smaller mirrorless systems that use lenses smaller than 67mm, you may also want to consider a 75mm Square Filter Holder that can accommodate the same amount of filters but the filters are smaller and cheaper.

Quite frankly, a Filter Holder is really nothing more than an accessory that allows you to stack filters on the front of a lens. As long as it is well-made and is easy to attach to the lens, all Filter Holders, no matter what brand, are created equal. Some may have a few ‘bells and whistles‘ such as a way to lock the filters in place or maybe a different method of inserting the filter, or even a built-in gasket. Regardless, the most important factor is to make sure you place good-quality filters in the holder.

Silence Corner Atoll

To read our review of the Silence Corner Atoll click here. We strongly recommend this product for those that frequently use a tripod.

Urth Square Filter Holder

Above: The URTH 100mm Square Filter Holder

Pauly Designed Streetwear

Why use a Filter Holder?

Square Filter Holders are a staple in almost any serious landscape photographer’s bag, but you don’t need to use one if you solely use ND Filters to take long exposure images, or ND Grads to balance the exposure. You would be better off investing in a Circular ND or Circular ND Grad filter in this situation. However, using a Square Filter Holder and filters is actually the obvious choice if your objective is to combine ND Filters with an ND Grad Filter and perhaps even a C-PL filter at the same time. Alternatively, you can stack Circular Filters, but it is not ideal and certainly not advised on ultra-wide-angle lenses due to excessive vignetting.

A Square Filter Holder will also give you a lot more flexibility with your composition when taking a shot with an ND Grad Filter. Because you can adjust the filter in the holder, it allows you to properly align the filter with the horizon or the brightest area of the composition without adjusting the camera’s position. A Circular ND Grad Filter mounted on a lens is not adjustable and will require you to position the camera so that the filter is in the optimum position for the brightest area of the scene, which may not be necessarily the composition that you want.

Additionally, it depends on the kind of photography that interests you. As travel photographers, although we do use our Square Filter System for tripod-mounted shots, we mostly use the less cumbersome option of Circular Filters for handheld shots.

When would you use a Square Filter Holder?

As mentioned above, a Square Filter Holder and filters are almost exclusively used in Landscape Photography, or at any time when taking tripod-mounted shots that require multiple filters to be stacked. If you want to avoid any vignetting in your shots when using multiple filters, then a Square Filter Holder is the solution.

Peak Design Travel Tripod

The URTH 75mm & 100mm Square Filter Holder

The URTH Square Filter Holder was only released in mid-2021, so it is a bit of a latecomer to a very competitive market. Having said that, Urth used its very successful circular filter business as a launch pad into the Square Filter market. It was only a matter of time before they progressed in this direction.

The filter holder arrived in a robust mid-grey recyclable box. All products that are URTH branded are now packaged in the same mid-grey colour. Do not throw away the box straight away as your unique code is printed on the underside of the box lid. At your convenience, take a few moments to register your product to plant 5 trees in deforested regions of the world.

Inside the box, the Square Filter Holder will be securely held in place by square black recyclable packaging.

The filter holder is constructed with Magnalium, which is an aluminium alloy comprising 5% magnesium and 95% aluminium making it much stronger. The filter holder is convex-shaped and sleeker looking than the current NiSi Filter Holder which is octagonally shaped (NiSi V7 Holder). You will also notice that there are no protruding locking knobs on the side of the holder with the exception of low-profile dials on both sides that control the rotation of the C-PL (Circular Polarizer) if it is being used.

In comparison to our NiSi Square Filter Holder V5 (sorry, can’t compare it to the V6 or V7 holders), it is slightly wider but smaller in height.

Topaz Labs banner
URTH 100mm Square Filter Holder

Above: Inside the box – the 100mm Square Filter Holder and 86mm lens adapter

The filter holder can accommodate a Circular C-PL Filter, and two 100mm Square Filters simultaneously (sold separately). Alternatively, if you have the 75mm Square Filter Holder it will hold a C-PL and two 75mm Square Filters. This is one slot less than most holders but then most people would rarely use 3 slots anyway. If you commonly use 3 square filters simultaneously then the Urth Filter Holder will not suit your needs.

Because the URTH Square ND Filters are not provided with an attached rubber gasket to eliminate light leaks, the filter holder has a built-in rubber gasket on the edge of the inner rim. This added feature is not required if you are only using a Square ND Graduated Filter, but it is essential if you are taking fairly long exposures when using the Urth ND Filters. We had the issue of light leaks when using the GOBE Square ND10000 13-stop filter (now discontinued), but a spare NiSi rubber gasket applied to the back of the filter fixed it immediately. Our only concern at this stage is whether the built-in rubber gasket in the Filter Holder will remain in place over time with continual use. Only time will tell, although URTH does offer a Lifetime Warranty on the product.

Please Note: If you are using another brand of Square ND Filter that already has a rubber gasket applied to the rear of the filter, you may have to remove this if the filter is too tight in the first slot. As a result of the built-in rubber gasket, it is extremely tight when inserting a Graduated ND Filter into the first slot due to the friction. If you are only using a Graduated ND Filter then you may want to consider using the filter in the second slot.

Square ND Filter with rubber gasket

Above: The NiSi Square ND Filters have a rubber gasket applied to the rear of the filter to protect from light leaks. Urth Filters do not have this gasket, instead it is part of the Filter Holder.

Photography Planner

The Urth Filter Holder also has a lock on the back of the holder. This locks the adapter ring once attached to the holder. The holder also includes the standard 86mm adapter ring. When ordering the Filter Holder make sure that you order the appropriate adapter rings (sold separately) to fit all lenses that you will be using with the Filter Holder.

Lastly, as mentioned previously, there are two low-profile geared wheels on the left and right sides of the holder that operate the rotation of the C-PL if attached. 


We tested the filter holder on a Full Frame sensor camera with our ultra-wide-angle Laowa 15mm f/2 Zero-Distortion lens and found no vignetting, however, once filters were added there was some darkening in the corners although no more than our NiSi V5 Square Filter Holder.

Attaching the Square Filter Holder

Everyone will have their own method of attaching the filter holder to their camera. For us, we have found below is the easiest way.

  1. Always remove any circular filters attached to your lens
  2. Attach the correct size adapter ring to the front of your lens
  3. If you are using the C-PL filter (sold separately), then remove the supplied 86mm Adapter Ring from the Filter Holder. The C-PL filter is 86mm and therefore will attach to the adapter rings (sold separately) as well as hold the Filter Holder. If you are not using the C-PL filter, then remove the 86mm adapter ring from the Filter Holder and attach it to the adapter ring that you attached to the lens in Step 2. 
  4. To attach the Filter Holder to the adapter ring we have found that the best way is to locate the two small metal tabs on the inner rim of the holder and insert the adapter ring under these tabs first. Then secure with the locking knob which is located on the opposite corner of the filter holder. Slightly loosen the locking knob if the adapter ring does not drop into place. DO NOT CONTINUALLY TURN THE LOCKING KNOB ANTI-CLOCKWISE AS IT WILL DETACH FROM THE HOLDER and you may lose it. If you lose it you will not be able to hold the Filter Holder in place.  TIP:  we used a small flathead screwdriver to tighten the locking knob screw. Ideally, this locking knob should not be able to be removed.
  5. Once locked in place, check to make sure it is securely connected before inserting the filters. Initially, we found that the filters are quite tight in the filter holder. This may loosen over time with some use. We would suggest, that you hold the camera securely when adding the filters or consider adding the filters prior to attaching the filter holder to the camera.
  6. To remove the Filter Holder slightly turn the Locking Knob anti-clockwise to release. 
ON1 Photo Raw 2024
Sony A7RIII + Sony 16-35 f/4 lens

Above: Sony 16-35 f/4 lens without any attachments

Attaching the 72mm adapter ring

Above: Sony 16-35 f/4 lens – attaching the 72mm adapter ring

Attaching the supplied 86mm adapter ring

Above: Sony 16-35 f/4 lens – attaching the 86mm adapter ring to the 72mm adapter ring

Attaching the URTH 100mm Square Filter Holder to the adapter ring

Above: Sony 16-35 f/4 lens – attaching the filter holder to the 86mm adapter ring

URTH 100mm Square Filter Holder with Graduated Filter

Above: Sony 16-35 f/4 lens with a Graduated ND Filter

URTH 100mm Square Filter Holder with ND Filter

Above: Sony 16-35 f/4 lens with an ND Filter in the first slot

Skylum Luminar Neo


The URTH 100mm Square Filter Holder is a great addition to their product range, however, in our opinion, it still needs several tweaks to be perfect. Firstly, the locking knob on the rear of the holder is not ideal and could easily be lost. We also think that the knob should be a different colour from the holder as it is quite difficult to see. The only other minor improvement is the tightness of the filters in the slots, although as mentioned, this may improve with use. The holder has been designed primarily to be used in conjunction with the URTH Square ND Filters as they do not have a rubber gasket attached to the rear of the filter and therefore are easier to insert into the first slot. However, if you own existing Square ND Filters from another manufacturer that has a gasket attached to the rear of the filter you will more than likely have to remove the gasket to use in the first slot of the URTH holder. 

All-in-all, it is a sleek, functional and well-designed holder that has been a long time coming and we’re sure that photographers will get a lifetime of use out of the product. We envisage that this product would be perfect for the photographer who is aiming to purchase their first filter holder. 

Except for the purchase of the individual filters, here’s what you’ll need to order if you want to use the URTH 75mm or 100mm Filter Holder –

  1. URTH 100mm or 75mm Filter Holder
  2. URTH Adapter Rings if using lenses with a smaller thread than 86mm
  3. URTH C-PL Filter (optional)

The adapter rings are available from 37mm – 86mm for the 100mm Filter Holder and 37mm – 67mm for the 75mm Filter Holder.

Peak Design Slide Camera Strap


Below is the price of the Urth Square Filter Holder, Adapter Ring, and CPL Filter at the time of writing. To purchase, click on the product links or the banner below  – 


Urth rarely offers discounts on its products so if you find this review helpful, please click on the links in this post if you want to purchase. It costs you nothing extra to purchase the item using these links but will help support us so we can continue writing these reviews. 

Thanks so much for your support!

URTH 100mm Square Filter Holder


URTH CPL Filter for 100mm Square Filter Holder


URTH Adapter Ring for 100mm Square Filter Holder


URTH 75mm Square Filter Holder


URTH CPL Filter for 75mm Square Filter Holder


URTH Adapter Ring for 75mm Square Filter Holder




If you are interested in reading any of our other Gobe /Urth product reviews click the links below –

Disclaimer:  Although we are affiliated with URTH Filters and receive a commission on any sales, this review is totally unbiased. As Professional Photographers we would never recommend the use of any product unless we have used the product ourselves. We always strive to give you our honest opinion in order to help you make the best choice. We did receive the product with compliments of URTH but were not paid for this review. We may also receive commissions on other links in this post.

Was this article helpful?